Catalog # 108RED Description: 2 Ply Poly HCR 74 Red Gloss PU AS International Designation: E13/2 UI/U10 Red Gloss AS Item number: 32626 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (79.76 mm) 3.1400 in (109.98 mm) 4.3300 in Construction: Compound Top Cover Gloss Red PU Top Cover Description (1.00 mm) 0.0393 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 2 Anti Static Yes Overall Gauge (in) (2.59 mm) 0.1020 in Unit Weight- lb/PIW 0.0550 lbs/PIW Material Between Plies PU Maximum Width (in) 79 in Temperature Range (°F)- High 194 °F Temperature Range (°F)- Low -13 °F Top Cover Shore 85 N/A Bottom Cover Shore Special Characteristics: This belt is constructed of a highly cross rigid weft for use in Z-shaped conveyors or horizontal to incline conveyor applications. The cover is made of an 85 shore A gloss finish TPU that is abrasion resistant ideal for the automotive industry and recycling applications. Pull for 1% Elongation (13 N/mm) 74 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved No *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet