b'Light Weight Belting Specification SheetCatalog # 108RED Pulley Diameter, MinimumItem number: 32626Description:2 Ply Poly HCR 74 Red Gloss PU ASInternational Designation:E13/2 UI/U10 Red Gloss AS A) Normal Flex (79.76 mm) 3.1400 inB) Back Flex (109.98 mm) 4.3300 inConstruction:Compound Top Cover Red PU Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0393 in Pull for 1% Elongation (13 N/mm) 74 lbs/sq inTop Cover Description GlossTop Cover Shore 85 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.59 mm) 0.1020 inUnit Weight- lb/PIW 0.0550 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:This belt is constructed of a highly cross rigid weft for use in Z-shaped conveyors or horizontal to incline conveyor applications. The cover is made of an 85 shore A gloss finish TPU that is abrasion resistant ideal for the automotive industry and recycling applications.*****All Values are nominal and subject to change without notice.*****'