b'Light Weight Belting Specification SheetCatalog # 108GL Pulley Diameter, MinimumItem number: 10752Description:2 Ply Poly CR57 White PU Gloss x Bare NA FDAInternational Designation:E10/2 U0/U2 White PU GL NA FDA EU A) Normal Flex (9.98 mm) 0.3930 inB) Back Flex (39.98 mm) 1.5740 inConstruction:Compound Top Cover White PU Belt Strength:Top Cover Thickness (in) (0.18 mm) 0.0070 in Pull for 1% Elongation (10 N/mm) 57 lbs/sq inTop Cover Description GlossTop Cover Shore 85 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static No show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.30 mm) 0.0511 inUnit Weight- lb/PIW 0.0248 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 79 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 108GL is a non-antistatic belt that is suitable for most knife edge applications. The cover is 85 durometer high gloss finish suitable for bread plants, chocolate applications, frozen foods, variety of foods (cheese, candy, prepared foods, etc.) salting and the pharmaceutical industry. A rigid polyester carcass is very good for dimensional stability that extends longer service life. Suitable for metal detector applications in all food applications. Complies with FDA regulations and EU recommendations for the transport of foodstuffs, regulations include 1935/2004/EC and 2023/2006/EC.*****All Values are nominal and subject to change without notice.*****'