b'Belting Specification SheetCatalog # 9 Pulley Diameter, MinimumItem number: 10401 Minimum Pulley Diameter 1.50 inDescription:3 Ply Poly 105 White Butyl COS Belt Strength:International Designation: Tension Rating (PIW) 105 PIWN/AConstruction: Splice Instructions:Compound Top Cover White Butyl Splice Step YesColor White Splice Finger NoTop Cover Thickness (in) (0.79 mm)1/32 inTop Cover Description Smooth Other:Static Conducting NoCompound Bottom Cover White Butyl Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat YesBottom Cover Description Friction Surface Impression Top NoOil Resistant NoNumber of Plies 3 Fire Resistant NoOverall Gauge (in) (2.38 mm)3/32 in FDA Approved YesUnit Weight- lb/PIW 0.0560 lbs/PIWSuggested Fasteners:Carcass Type Polyester Flexco Plate/Rivet N/ACompound White Butyl Flexco Hinged N/ATemperature Range (F)- High 300 F Alligator Staple #62Clipper Lace #1ATemperature Range (F)- Low -65 F Alligator Lace #7Special Characteristics:A specification designed for extreme temperature applications from -65 to 300 degrees F. Minimum pulley diameter for cold applications is 4" and 1-1/2" for high heat applications. Recommended for high-heat uses such as heat sealing machines and heat (shrink) tunnels; also cold rooms and freezers. Allow 1% shrinkage in the belt length when operated at temperatures over 275 degrees F. Belt is FDA accepted.*****All Values are nominal and subject to change without notice.*****'