Catalog # 103HCR Description: 1 Ply Poly CR40 HCR PU White Gloss x Bare AS FDA International Designation: E7/1 U0/U4 White AS FDA EU Item number: 10734 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (4.98 mm) 0.1960 in (19.99 mm) 0.7870 in Construction: Compound Top Cover Gloss White PU Top Cover Description (0.35 mm) 0.0138 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static Yes Overall Gauge (in) (0.99 mm) 0.0390 in Unit Weight- lb/PIW 0.0183 lbs/PIW Material Between Plies N/A Maximum Width (in) 78 in Temperature Range (°F)- High 194 °F Temperature Range (°F)- Low -13 °F Top Cover Shore 85 N/A Bottom Cover Shore Special Characteristics: This belt is a one of a kind spec, featuring a highly cross rigid one ply monofilament carcass that stays absolutely flat without curling. It is antistatic and will go around a 0.2" knife edge with a 135° angle. This is the perfect Cooling Tunnel belt with excellent dimensional stability for extremely long and wide conveyor belts ( i.e. 450 ft X 52 in), Stays absolutely flat with great temperature variations during cooling process. Excellent release and easy to clean. High resistance to oils and fats. Complies with FDA regulations and EU recommendations for the transport of foodstuffs, regulations include 1935/2004/EC amd 2023/2006/EC. Pull for 1% Elongation (7 N/mm) 40 lbs/sq in Belt Strength: Splice Instructions: Foil No Splice Process Finger Press Temperature (°F) 320 °F Press Pressure (psi) 25 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet