Catalog # 103RCAS Description: 1 Ply Poly CR17 White PU RC x Bare AS FDA International Designation: E5/1 U0/U2 White Matte AS Item number: 10750 Pulley Diameter, Minimum A) Normal Flex B) Back Flex (4.06 mm) 0.1600 in (7.87 mm) 0.3100 in Construction: Compound Top Cover Matte White PU Top Cover Description (0.20 mm) 0.0080 in Top Cover Thickness (in) Bottom Cover Description PU Impregnated Compound Bottom Cover Polyester Bottom Cover Thickness (in) (0.00 mm) 0.0000 in Number of Plies 1 Anti Static Yes Overall Gauge (in) (0.71 mm) 0.0280 in Unit Weight- lb/PIW 0.0117 lbs/PIW Material Between Plies N/A Maximum Width (in) 79 in Temperature Range (°F)- High 176 °F Temperature Range (°F)- Low 8 °F Top Cover Shore 86 N/A Bottom Cover Shore Special Characteristics: The 103RCAS meets FDA compliance standards. The RC (Release Cover) makes it extremely good in applications where material release is important. The 103RCAS has a PU top cover giving it high abrasion resistance in addition to the high release properties. This belt is resistant to mineral and vegetable oils, fats, detergents. The 103RCAS is highly thermal conductive making it excellent for cooling tunnels and is also anti static Pull for 1% Elongation (5 N/mm) 28 lbs/sq in Belt Strength: Splice Instructions: Foil Yes Splice Process Finger Press Temperature (°F) 315 °F Press Pressure (psi) 22 lbs/sq in Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice. Other: Cross Rigid High Heat Yes No Impression Top No Oil Resistant Yes Fire Resistant No FDA Approved Yes *****All Values are nominal and subject to change without notice.***** Light Weight Belting Specification Sheet