b'Light Weight Belting Specification SheetCatalog # 103HCR Pulley Diameter, MinimumItem number: 10734Description:1 Ply Poly CR40 HCR PU White Gloss x Bare AS FDAInternational Designation: A) Normal Flex (4.98 mm) 0.1960 inE7/1 U0/U4 White AS FDA EU B) Back Flex (19.99 mm) 0.7870 inConstruction: Belt Strength:Compound Top Cover White PU Pull for 1% Elongation (7 N/mm) 40 lbs/sq inTop Cover Thickness (in) (0.35 mm) 0.0138 inTop Cover Description Gloss Splice Instructions:Top Cover Shore 85 Foil NoCompound Bottom Cover PolyesterBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNote:Listed above is a guideline only.Every vulcanizer is different and will Number of Plies 1 show different results.We recommend that you do a test splice with your Anti Static Yes press before attempting the actual belt splice.Overall Gauge (in) (0.99 mm) 0.0390 inUnit Weight- lb/PIW 0.0183 lbs/PIW Other:Material Between Plies N/A Cross Rigid YesMaximum Width (in) 78 in High Heat NoTemperature Range (F)- High 194 F Impression Top NoTemperature Range (F)- Low -13 F Oil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:This belt is a one of a kind spec, featuring a highly cross rigid one ply monofilament carcass that stays absolutely flat without curling. It is antistatic and will go around a 0.2" knife edge with a 135 angle. This is the perfect Cooling Tunnel belt with excellent dimensional stability for extremely long and wide conveyor belts ( i.e. 450 ft X 52 in), Stays absolutely flat with great temperature variations during cooling process. Excellent release and easy to clean. High resistance to oils and fats. Complies with FDA regulations and EU recommendations for the transport of foodstuffs, regulations include 1935/2004/EC amd 2023/2006/EC.*****All Values are nominal and subject to change without notice.*****'