b'Light Weight Belting Specification SheetCatalog # 103HCRB Pulley Diameter, MinimumItem number: 10758Description:1 Ply Poly CR40 HCR Blue PU x Bare AS FDAInternational Designation:E7/1 U0/U5 Blue AS FDA EU A) Normal Flex (4.98 mm) 0.1960 inB) Back Flex (19.99 mm) 0.7870 inConstruction:Compound Top Cover Blue PU Belt Strength:Top Cover Thickness (in) (0.55 mm) 0.0217 in Pull for 1% Elongation (7 N/mm) 40 lbs/sq inTop Cover Description GlossTop Cover Shore 85 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 25 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.14 mm) 0.0450 inUnit Weight- lb/PIW 0.0210 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 194 F High Heat NoTemperature Range (F)- Low -13 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:This belt is a one of a kind spec, featuring a highly cross rigid one ply monofilament carcass that stays absolutely flat without curling. It is antistatic and will go around a 0.2" knife edge with a 135 angle. This is the perfect Cooling Tunnel belt with excellent dimensional stability for extremely long and wide conveyor belts ( i.e. 450 ft X 52 in), Stays absolutely flat with great temperature variations during cooling process. Excellent release and easy to clean. High resistance to oils and fats. Complies with FDA regulations and EU recommendations for the transport of foodstuffs, regulations include 1935/2004/EC and 2023/2006/EC. \x00*****All Values are nominal and subject to change without notice.*****'