b'Belting Specification SheetCatalog # 80e Pulley Diameter, MinimumItem number: 10512 Min. Pulley Dia. - Head @ 80 - 100%24.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%20.00 in3 Ply 600 3/16in x Bare MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension18.00 inN/A or BelowMinimum Pulley Diameter- Tail 18.00 inConstruction: Splice Instructions:Compound Top Cover Black MOR Splice Step Size 16.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (4.83 mm)3/16 inTop Cover Description Smooth Other:Static Conducting NoCompound Bottom Cover Poly/Nylon Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Bare Impression Top NoNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (12.70 mm)1/2 in Fire Resistant NoUnit Weight- lb/PIW 0.2200 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black MORTemperature Range (F)- High 225 F Flexco Plate/Rivet BR-10/R5-1/2Temperature Range (F)- Low -25 F Flexco Hinged N/AAlligator Staple N/AClipper Lace N/ABelt Strength: Alligator Lace N/ATension Rating (PIW) 600 PIWSpecial Characteristics:This belt offers high strength and impact resistance, coupled with abrasion resistance and long flex life. Used primarily on high-tension conveyors with long centers or in abusive situations. It also features a MOR construction for applications where some oil or wood terpenes are present. Ideal for slider bed applications.*****All Values are nominal and subject to change without notice.*****'