b'Belting Specification SheetCatalog # 74b Pulley Diameter, MinimumItem number: 10422 Min. Pulley Dia. - Head @ 80 - 100%16.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%14.00 in2 Ply 220 1/16in x 1/16in FR/SC/VOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension10.00 inN/A or BelowMinimum Pulley Diameter- Tail 10.00 inConstruction: Splice Instructions:Compound Top Cover Black FR-VOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (1.60 mm)1/16 inTop Cover Description Smooth Other:Static Conducting YesCompound Bottom Cover Black FR-VOR Cross Rigid NoBottom Cover Thickness (in) (1.60 mm)1/16 in High Heat NoBottom Cover Description Smooth Impression Top NoNumber of Plies 2 Oil Resistant YesOverall Gauge (in) (6.35 mm)1/4 in Fire Resistant YesUnit Weight- lb/PIW 0.1200 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black FR-VORTemperature Range (F)- High 225 F Flexco Plate/Rivet #140/R5Temperature Range (F)- Low -25 F Flexco Hinged #375 or 550Alligator Staple N/AClipper Lace N/ABelt Strength: Alligator Lace N/ATension Rating (PIW) 220 PIWSpecial Characteristics:Specially compounded for the oily effects of grain, this belt is also static conductive. It carries the FR designation for flame resistance for above ground applications. Designed for grain conveyors and elevators where static charges must be held to a minimum. VOR compound is resistant to mineral oil and vegetable oil sprays.*****All Values are nominal and subject to change without notice.*****'