b'Belting Specification SheetCatalog # 7 Pulley Diameter, MinimumItem number: 10385 Minimum Pulley Diameter 2.00 inDescription:2 Ply Poly 100 White Nitrile COS Belt Strength:International Designation: Tension Rating (PIW) 100 PIWN/AConstruction: Splice Instructions:Compound Top Cover White Nitrile Splice Step YesColor White Splice Finger NoTop Cover Thickness (in) (1.19 mm)3/64 inTop Cover Description Smooth Other:Static Conducting NoCompound Bottom Cover White Nitrile Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Friction Surface Impression Top NoOil Resistant YesNumber of Plies 2 Fire Resistant NoOverall Gauge (in) (2.78 mm)7/64 in FDA Approved YesUnit Weight- lb/PIW 0.0620 lbs/PIWSuggested Fasteners:Carcass Type RFL Polyester Flexco Plate/Rivet N/ACompound White Nitrile Flexco Hinged N/ATemperature Range (F)- High 250 F Alligator Staple N/AClipper Lace #1ATemperature Range (F)- Low 0 F Alligator Lace #7Special Characteristics:Thicker, stronger version of the Poly White Nitrile Series; features heavier, stronger polyester fabric RFL treated for greater adhesion under rugged conditions; also heavier skim coats between plies and a superior wear-resistant nitrile cover; usual advantages of 100% polyester carcass. Can be hot water and steam cleaned. FDA approved.*****All Values are nominal and subject to change without notice.*****'