b'Belting Specification SheetCatalog # 140c Pulley Diameter, MinimumItem number: 10566 Min. Pulley Dia. - Head @ 80 - 100%18.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%16.00 in3 Ply 330 1/8in x Bare Cleat Top MOR TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension12.00 inN/A or BelowMinimum Pulley Diameter- Tail 12.00 inConstruction: Splice Instructions:Compound Top Cover Black MOR Splice Step Size 8.00 inColor Black Splice Process Step HotTop Cover Thickness (in) (3.30 mm)1/8 inTop Cover Description Cleated Other:Static Conducting NoCompound Bottom Cover Black MOR Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Bare Impression Top YesNumber of Plies 3 Oil Resistant YesOverall Gauge (in) (10.16 mm)25/64 in Fire Resistant NoUnit Weight- lb/PIW 0.2300 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black MORTemperature Range (F)- High 225 F Flexco Plate/Rivet #190/R5Temperature Range (F)- Low -25 F Flexco Hinged #550Alligator Staple N/AClipper Lace N/ABelt Strength: Alligator Lace N/ATension Rating (PIW) 330 PIWSpecial Characteristics:Made to prevent or reduce slideback on steep inclines. Chevron belting also increases conveyor capacity by quick pick-up at the point of loading. Ideal for slider bed applications, handling wet and/or granular materials such as wet sand and gravel. Also popular in recycling and wood chip applications. ***NOTE: OAG DOES NOT INCLUDE THE CLEAT HEIGHT********All Values are nominal and subject to change without notice.*****'