b'Belting Specification SheetCatalog # 79b Pulley Diameter, MinimumItem number: 41780 Min. Pulley Dia. - Head @ 80 - 100%16.00 inDescription: TensionMin. Pulley Dia. - Head @ 60 - 79%14.00 in3 Ply 225 7/16in Green Diamond x Bare TensionInternational Designation: Min. Pulley Dia. - Head @ 59% Tension10.00 inN/A or BelowMinimum Pulley Diameter- Tail 10.00 inConstruction: Splice Instructions:Compound Top Cover Green SBR/NR Blend Splice Step Size 8.00 inColor Green Splice Process Step HotTop Cover Thickness (in) (12.70 mm)1/2 inTop Cover Description Green 2" x 3" Diamond Other:Static Conducting NoCompound Bottom Cover Cross Rigid NoBottom Cover Thickness (in) (0.00 mm) 0.00 in High Heat NoBottom Cover Description Bare Impression Top YesNumber of Plies 3 Oil Resistant NoOverall Gauge (in) (16.51 mm)41/64 in Fire Resistant NoUnit Weight- lb/PIW 0.3500 lbs/PIW FDA Approved NoCarcass Type Poly/Nylon Suggested Fasteners:Compound Black SBR 40Temperature Range (F)- High 220 F Flexco Plate/Rivet N/ATemperature Range (F)- Low 0 F Flexco Hinged N/AAlligator Staple N/AClipper Lace N/ABelt Strength: Alligator Lace N/ATension Rating (PIW) 225 PIWSpecial Characteristics:This 40 Durometer Diamond Top Belt is lightweight and flexible with high grip and exceptional wear resistance for prolonged service life. The rubber is also compound to be non-marking and will not cause damage to the planed lumber edges.*****All Values are nominal and subject to change without notice.*****'